MULTIMODE VCF & VCA
A modern, universal multimode VCF and VCA combined in a single module, featuring an integrated mixer and overdrive functionality. Four selectable filter modes are available: 4-pole low-pass, 2-pole low-pass, 2-pole band-pass, and 2-pole high-pass.
In low-pass modes, Q-compensation is not only switchable but also adjustable, allowing you to fine-tune how much low-frequency content is restored after resonance boost.
For filter frequency control, in addition to a switchable V/OCT input (OFF / ½ / FULL tracking), there are three individually controllable frequency modulation inputs:
- FCV1 directly modulates the filter.
- FCV2 has a selectable modulation source: it can be the FCV2 input, the audio signal before the VCF (from the mixer), or the audio signal after the VCF.
- FCV3 also directly modulates the filter, but can be switched so that the incoming ENV signal controls the post-filter VCA. The VCA also has its own dedicated CV input.
Additionally, there is a controllable RESO CV input for resonance modulation.
The VCF features three controllable audio inputs. The pre-filter mixer stage can be overdriven, indicated by an LED — this results in an overdrive effect inherent to the mixer’s design.
The module provides separate outputs for the VCF, as well as both input and output for the VCA.
Hidden Parameters of MULTIMODE VCF & VCA
This menu contains calibration parameters for filter resonance:
Reso level of 4PLP, 2PLP, 2PBP, 2PHP
Module features of ASR211 MULTIMODE VCF & VCA:
Block diagram of ASR211 MULTIMODE VCF & VCA:
Owner’s manual:
Be the first to review “MULTIMODE VCF & VCA”
You must be logged in to post a review.
Related products
Two wooden control wheels designed for morphing between snapshots and modulating that morphing process. Mood Wheels allows you to completely reshape the sound of the Warthog within a single patch, making the music more expressive and alive. It’s called “MOOD” rather than “MOD” for a reason — this is about shaping the mood, not just [...]
Electronic Distribution System for Adamsynths™ Warthog Modules and Eurorack Compatibility. The ASR-RAILS is a dedicated electronic distribution layer developed for the Adamsynths™ Warthog modular synthesizer system, responsible for both power delivery and the physical infrastructure of PatchCon internal communication channels. Due to the elevated power requirements and inter-module communication demands introduced by Total Recall, Warthog [...]
This module is designed for stage use and managing complex patches. Its main purpose is to eliminate the need for physically rearranging patch cables. With the help of snapshot functions, it can dynamically reroute connections within a single patch. The MATRIX 428 features four inputs and eight outputs, all capable of routing audio, CV, and [...]
Smart Signal Distribution, Fully Passive The Multiples 16 is a 4-input, 12-output passive signal distributor that dynamically adapts to your patching setup. Inputs follow a priority-based logic, automatically claiming their respective output groups based on how many inputs are connected. Behavior: If only the first input is connected, its signal is distributed to all 12 [...]
The Adamsynths™ Warthog is an analog modular synthesizer equipped with Total Recall technology. It is the first analog modular synthesizer in the world to feature full patch memory and recall. And yes. This is not a digital platform. Not a virtual modular synthesizer. This is a 100% analog sound engine, Eurorack format, plug & play [...]
The ASR9AUME Outboard is the dedicated outboard interface of the Warthog system, providing external connectivity for both the Mixbooth and the Central Unit. All connectors are located on the rear panel of the Warthog for convenient access, without interfering with patch cabling or module operation. Mixbooth Connectors: Stereo Headphone Output Stereo Main Output 2 AUX [...]
High-Performance Power Supply for Adamsynths™ Warthog Modules and System. The ASR-PSU is a high-performance power supply designed specifically for the Adamsynths™ Warthog modular synthesizer system, engineered to meet the elevated power demands of its advanced modules. Due to the complexity and functionality of the Warthog modules — particularly those supporting Total Recall — the system [...]
A single module combining an ADSR and a DADSR-type, CV-controllable envelope generator. The envelope generators operate in either GATED or TRIGGERED mode, which determines LEGATO or STACCATO playing behavior. Gated – The envelope remains active as long as the gate signal is held. In legato playing, it does not retrigger. Triggered – The envelope restarts [...]
Reviews
There are no reviews yet.